新闻资讯
Check category

Taper calculation for winding tension control

  • Categories:R&D
  • Author:
  • Origin:
  • Time of issue:2019-11-12 11:08
  • Views:4

Taper calculation for winding tension control

(Summary description)Tapercalculationforwindingtensioncontrol  Thetapercalculationisforthegradualattenuationofthecontroltensionduringthewindingprocess.Theprincipleisthatasthecoildiameterbecomeslargerandlarger,thetensionwi

  • Categories:R&D
  • Author:
  • Origin:
  • Time of issue:2019-11-12 11:08
  • Views:4
Information
  • Taper calculation for winding tension control
  •   Taper calculation for winding tension control
      The taper calculation is for the gradual attenuation of the control tension during the winding process. The principle is that as the coil diameter becomes larger and larger, the tension will gradually become smaller, ensuring that the coil diameter is larger, the area is larger, and the film shrinks inconsistently. The inside is locked inside, so that the film is rolled up and should be brushed.
      The previous winding is a constant tension, which seriously affects the quality of the product, and the wound product is easily deformed. After the tension taper calculation principle is adopted, the film is cooled during the winding cooling process, and the winding tension is changed, and the winding is reduced. Deformation of the membrane.
      Design: D——Product winding volume (variable)
      1. When the winding tension is constant, the film winding diameter becomes larger, the winding tension is unchanged, and the film product is deformed;
      2. Adjustable when taper is used when winding tension is adjusted
      And control the film winding tension, the film roll diameter becomes larger, so that the winding tension is reduced, ensuring the winding
      The film does not deform due to changes in tension.

Scan the QR code to read on your phone

Honorary
Qualification

Speech by
leader

Corporate
Culture

Technological
Strength