Three-layer co-extrusion top-spinning cold blown film production line_Energy saving extruder Extrusion blown film production line

Home page

Three-layer co-extrusion top-spinning cold blown film production line

Category:

1. The host machine adopts frequency converter for stepless speed regulation control;

2. The die head adopts the international advanced new cone streamline superposition technology;

3. The traction system adopts horizontal ± 360 ° reciprocating rotation;

4. The IBC system uses ultrasonic to control the internal cooling of the membrane bubble, and is equipped with a new electric squirrel cage foam stabilizer;

5. Ultrasonic automatic correction device;

Tel：

+86 139 7114 6633

Inquiry

Details

　　The three-layer co-extruded energy-saving blown film production line consists of three single-screw extruder auxiliary machines.

　　1. The host adopts Zhejiang Golden Conch.

　　2. The die adopts the spiral die of the international advanced new flow channel technology.

　　3. The main machine is heated by cast aluminum; the die is heated by high temperature ceramic strip heater…

　　4. The upper traction rotating device adopts a direct transmission type horizontal ±360° reciprocating rotation.

　　5. The internal cooling system （IBC） automatically measures and controls the bubble size using a 3-point over-sound probe.

　　6. Configure the electric squirrel cage stabilization bubble holder.

　　7. Configure the ultrasonic automatic correcting device.

　　8. Automatic friction full tension control control sensor, control traction tracking receiving and unloading system.

　　9. The control system adopts Japanese Mitsubishi PLC centralized control technology.

Model	Unit	SGXM-2800*3	SGXM-2600*3	SGXM-2400*3	SGXM-2200*3	SGXM-2000*3	SGXM-1800*3	SGXM-1600*3	SGXM-1400*3
Maximum diameter of film	mm	2600	2400	2200	2000	1800	1600	1400	1200
Membrane thickness	mm	0.025-0.12	0.025-0.12	0.025-0.12	0.025-0.12	0.025-0.12	0.025-0.12	0.025-0.12	0.025-0.12
Screw diameter	mm	Φ100/φ85/φ85	φ85/φ80/φ80	φ85/φ75/φ75	φ80/φ70/φ70	Φ65/φ65/φ65	Φ65/φ65/φ55	Φ65/φ55/φ55	Φ65/φ55/φ55
Screw length to diameter ratio	L/D	30/1	30/1	30/1	30/1	32/1	32/1	32/1	32/1
Screw maximum speed	r/min	(85)95	95	95	95	95(110)	110	110	110
Main motor power	kw	90KW(75KW)	75kw(55KW)	55KW(45KW)	55KW(45KW)	45KW(37KW)	37kw	37kw(30kw)	37kw(30kw)
Bubble cooling method		Double air outlet ring + IBC bubble internal cooling system
Traction speed	m/min	5-60	5-60	5-60	5-60	5-60	5-60	5-60	5-60
Yield	KG	320	300	280	260	230	190	170	150
Mold diameter	mm	￠600	￠550	￠500	￠450	￠400	￠350	￠300	￠250
Total power	Kw	260	245	220	206	192	180	170	150
Dimensions(LWH)	mm	118.213	117.813	10.57.2512	10.57.2512	9.86.69.8	9.75×6.8×9.0	9.75×6.6×9.0	8.24×5.3×8.0
Weight	T	30	29	28	25	23	20	18	15
Suitable raw materials	LDPE LLDPE mPE EVA and compounding

High product quality, large capacity and low energy consumption. Our company has independently developed high-speed and high-capacity die heads by introducing and absorbing foreign advanced technology. The relationship between the melt flow rate, flow rate and the pressure in the die cavity, as well as the disturbance of the whole melt flow caused by the differential flow produced by the coextrusion of raw materials with different viscosities, were calculated mathematically.

The changes in physical means and manufacturing can minimize the pressure when the melt extrudes the die, reduce the functionality of various raw materials with different viscosities in the melt, and the melt can be extruded uniformly with undifferentiated flow to avoid melt damage. The die head has a reasonable and compact structure, accurate, short and smooth flow channel distribution, no dead corner accumulation, reduces the disturbance in the melt movement, is suitable for extrusion molding of various materials, and overcomes the flow anomalies caused by the common extrusion of a variety of materials with different viscosities. With few crystal points, the output is large, and energy consumption is low. Compared with the conventional die head, the extrusion amount is increased by about 40%.

Key word:

Film blowing production line

Traction system

Full tension control system

PLC centralized control

Follow us